This is an old revision of the document!

====== How to configure multiple PHP servers for the asterCC system ====== ===== System Details ===== * CTI(Asterisk)、Nginx：192.168.1.62 (Extranet IP：110.249.148.246) * MySQL：192.168.1.60 * PHP1：192.168.1.61 * PHP2：192.168.1.70 <note> Note: Before doing the distribution, make sure that the version of asterCC for all servers must be the same, followed by the same module. </note> 1.Before distributing the system, you need to back up the database on the CTI machine. <code> mysqldump -uroot -ppassword astercc10 > file.sql </code> And then in the new mysql database server (192.168.1.60) on the backup data import. <code> mysql -uroot -ppassword astercc10 < file.sql </code> 2.On the MySQL machine, the CTI, PHP1, PHP2 machine database authorization. In the mysql> under the implementation of the following order: <code> grant all privileges on astercc10.* to astercc@'192.168.1.%' identified by 'asterccpw'; </code> 3.In the CTI, PHP1, PHP2 three machines /etc/astercc.conf, revised: [database] and [statistics] tab under the database information: <code> [database] dbtype = mysql dbhost = 192.168.1.60 dbname = astercc10 dbport = 3306 username = astercc password = asterccpw prefix= cc10_ [statistics] ;on/off status = on dbtype = mysql dbhost = 192.168.1.60 dbname = astercc10 dbport = 3306 dbuser = astercc dbpassword = asterccpw prefix= cc10_ [system] ;if Cluster no,php,asterisk,all cluster = php </code> <note> Note: The conf file in the system under the label, do what cluster, it will be modified into what. </note> 4.In /var/www/html/asterCC/app/config/database.php file var $default=array database at the end of the file information is modified as follows: class DATABASE_CONFIG { var $default = array( 'driver' => 'mysql', 'persistent' => false, 'host' => '192.168.1.60', 'login' => 'astercc', 'password' => 'asterccpw', 'database' => 'astercc10', 'prefix' => 'cc10_', 'encoding' => 'utf8', ); <note> Note: The contents of $test need not be modified。 </note> 5.Configure the iptables service, the implementation of the machine configuration is complete：service iptables restart CTI (and Nginx) machines： <code> *filter :INPUT DROP [32888:6036616] :FORWARD DROP [0:0] :OUTPUT ACCEPT [38964:13133002] -A INPUT -p udp -m udp --dport 5060 -j ACCEPT -A INPUT -p udp -m udp --dport 4569 -j ACCEPT -A INPUT -p udp -m udp --dport 5036 -j ACCEPT -A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT -A INPUT -p udp -m udp --dport 2727 -j ACCEPT -A INPUT -p udp -m udp --dport 137:138 -j ACCEPT -A INPUT -p udp -m udp --dport 123 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 8081 -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -p tcp -m tcp --dport 21 -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 139 -j ACCEPT -A INPUT -p tcp -m tcp --dport 389 -j ACCEPT -A INPUT -p tcp -m tcp --dport 445 -j ACCEPT -A INPUT -p tcp -m tcp --dport 5038 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A INPUT -s 127.0.0.1/32 -d 127.0.0.1/32 -j ACCEPT -A INPUT -m state --state ESTABLISHED -j ACCEPT COMMIT </code> On a MySQL machine: <code> *filter :INPUT DROP [32888:6036616] :FORWARD DROP [0:0] :OUTPUT ACCEPT [38964:13133002] -A INPUT -p udp -m udp --dport 5060 -j ACCEPT -A INPUT -p udp -m udp --dport 4569 -j ACCEPT -A INPUT -p udp -m udp --dport 5036 -j ACCEPT -A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT -A INPUT -p udp -m udp --dport 2727 -j ACCEPT -A INPUT -p tcp -m tcp --dport 3306 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -p tcp -m tcp --dport 21 -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p udp -m udp --dport 161 -j ACCEPT -A INPUT -p tcp -m tcp --dport 161 -j ACCEPT -A INPUT -p udp -m udp --dport 162 -j ACCEPT -A INPUT -p tcp -m tcp --dport 162 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A INPUT -s 127.0.0.1/32 -d 127.0.0.1/32 -j ACCEPT -A INPUT -m state --state ESTABLISHED -j ACCEPT COMMIT </code> On PHP1 machines: <code> *filter :INPUT ACCEPT [32888:6036616] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [38964:13133002] -A INPUT -p udp -m udp --dport 5060 -j ACCEPT -A INPUT -p udp -m udp --dport 4569 -j ACCEPT -A INPUT -p udp -m udp --dport 5036 -j ACCEPT -A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT -A INPUT -p udp -m udp --dport 2727 -j ACCEPT -A INPUT -p tcp -m tcp --dport 9000 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -p tcp -m tcp --dport 21 -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 5038 -j ACCEPT COMMIT </code> On PHP2 machines: like PHP1 <code> Port: According to the actual situation, the /etc/sysconfig/iptables file to retain the port. 21: FTP default port 22: SSH default port 80: http acquiescence port, because I changed the machine 8081, the CTI iptables added 8081 123: NTP default port 137: udp samba port 138: udp samba port 139: tcp samba port 389: tcp samba port 445: tcp samba port 901: tcp samba port 161: Port of SNMP 162: Port of the SNMP trap 443: https default port 2727: MGCP default port 3306: mysql default port 4569: IAX2 default port 5036: IAX1 default port 5038: Asterisk default port 5060: sip The default port 9000: php default port 10000: 20000: Asterisk RTP to use the port </code> 6.In CTI, PHP1 installed samba services, the Executive Order: <code> yum install samba </code> 7.After installation is complete, create samba user and password, such as: sbu/123456, run： <code> useradd sbu </code> And then, when prompted, enter 123456: <code> smbpasswd -a sbu </code> 8.Modify the samba configuration file /etc/samba/smb.conf, smb.conf file at the end add the following: On a CTI machine: <code> [ccastspool] path = /var/spool/asterisk comment = Home Directories browseable = no writable = yes ; valid users = %S ; valid users = MYDOMAIN\%S create mask=777 directory mask = 777 force user = asterisk [ccastetc] path = /etc/asterisk/ comment = Home Directories browseable = no writable = yes ; valid users = %S ; valid users = MYDOMAIN\%S create mask=777 directory mask = 777 force user = asterisk [ccastlib] path = /var/lib/asterisk/ comment = Home Directories browseable = no writable = yes ; valid users = %S ; valid users = MYDOMAIN\%S create mask=777 directory mask = 777 force user = asterisk [ccscripts] path = /opt/asterisk/scripts/astercc comment = Home Directories browseable = no writable = yes ; valid users = %S ; valid users = MYDOMAIN\%S create mask=777 directory mask = 777 force user = asterisk </code> On PHP1 machines: <code> [ccdata] path = /var/www/html/asterCC/data comment = Home Directories browseable = no writable = yes ; valid users = %S ; valid users = MYDOMAIN\%S create mask=777 directory mask = 777 force user = asterisk [ccstatistics] path = /var/www/html/asterCC/statistics comment = Home Directories browseable = no writable = yes ; valid users = %S ; valid users = MYDOMAIN\%S create mask=777 directory mask = 777 force user = asterisk </code> 9.After the configuration is complete, restart the Samba service configuration to take effect, execute the command: <code> service smb restart </code> 10.The samba file, mounted on each other. (For example, on a CTI machine, mount the ccdata from the PHP1 machine to the /var/www/html/asterCC/data directory on the CTI machine, and then mount the cdt file on the CTI machine. Then need to CTI machines, /var/www/html/asterCC/data backup, the backup process is not described here in detail) On the CTI machine, execute the following commands to mount: <code> mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccdata /var/www/html/asterCC/data mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccstatistics /var/www/html/asterCC/statistics </code> PHP1 machines, followed by the implementation of orders, carrying: <code> mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastspool /var/spool/asterisk mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccscripts /opt/asterisk/scripts/astercc mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastlib /var/lib/asterisk mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastetc /etc/asterisk </code> PHP2 machines, followed by orders for carrying: <code> mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccstatistics /var/www/html/asterCC/statistics mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccdata /var/www/html/asterCC/data mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastspool /var/spool/asterisk mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastlib /var/lib/asterisk mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastetc /etc/asterisk mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccscripts /opt/asterisk/scripts/astercc </code> Set the boot automatically mount, master and slave can be mounted on all the settings are similar to the following: <code>vim /etc/fstab</code> <code>文件末增加如下 ： //192.168.1.61/ccdata /var/www/html/asterCC/data cifs defaults,username=sbu,password=123456 0 0</code> {{:zh:常见问题及解答:selection_004.png?750|}} 11.修改 /etc/php-fpm.d/www.conf 配置文件内容 CTI机器上： <code> [www] listen=127.0.0.1 listen.allowed_clients=127.0.0.1 </code> PHP1机器上： <code> [www] listen=192.168.1.61:9000 listen.allowed_clients=127.0.0.1,192.168.1.61,192.168.1.62 </code> PHP2机器上： <code> [www] listen=192.168.1.70:9000 listen.allowed_clients=127.0.0.1,192.168.1.70,192.168.1.62 </code> 12.修改/usr/local/nginx/conf/nginx.conf 配置文件 CTI机器上： 12-1：在http中添加以下内容： <code> http{ upstream myphp { #ip_hash; PHP负载均衡 server 192.168.1.61:9000 weight=2; server 192.168.1.70:9000 weight=2; } } </code> <note> 注：http中server内的listen xxxx default，是指的页面访问的端口号。 </note> 12-2：在location中前面位置添加以下内容，并将默认配置的fastcgi_pass 127.0.0.1:9000; 用#号注释掉： <code> location ~ .*\.(php|php5)?$ { #这个表示login和reload时，使用本机的PHP服务，因此CTI的php-fpm服务是开启的，而且开机自启动 set $target myphp; if ($request_uri ~* login) { set $target 127.0.0.1:9000; } if ($request_uri ~* reloadConf) { set $target 127.0.0.1:9000; } fastcgi_pass $target; #fastcgi_pass 127.0.0.1:9000; } </code> <note> 注：PHP1与PHP2机器上，这些配置都不用管，因为PHP1和PHP2上不使用nginx服务，默认fastcgi_pass 均为 127.0.0.1:9000; 如果只使用1台服务器(如:PHP1)运行PHP服务，而不使用PHP负载均衡，那么，CTI中不需要添加任何的内容。并且，location中第一句set $target myphp; 内容也需要修改成PHP1的地址加端口，即：set $target 192.168.1.61:9000; </note> 13.授权相关文件的共用 CTI机器上： 13-1：先拷贝到mount的目录： <code> cp -Rp /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp /var/www/html/asterCC/statistics/agentsxindesk.ctp </code> 再执行： <code> ln -s /var/www/html/asterCC/statistics/agentsxindesk.ctp /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp </code> 13-2：拷贝： <code> cp -Rp /var/www/html/asterCC/app/config/database.php /var/www/html/asterCC/statistics/database.php </code> 再执行： <code> ln -s /var/www/html/asterCC/statistics/database.php /var/www/html/asterCC/app/config/database.php </code> 13-3：/opt/asterisk/scripts/astercc/identity.astercc 文件，不用做任何操作，但要保证该文件，是最开始CTI机器上mount前备份过的文件。 13-4：/opt/asterisk/scripts/astercc/license.astercc文件， 不用做任何操作，但要保证该文件，是最开始CTI机器上mount前备份过的文件。 13-5：拷贝： <code> cp -Rp /usr/local/conf/hcdesk.conf /opt/asterisk/scripts/astercc/hcdesk.conf </code> 再执行： <code> ln -s /opt/asterisk/scripts/astercc/hcdesk.conf /usr/local/conf/hcdesk.conf </code> 13-6：拷贝： <code> cp -Rp /etc/astercc.conf /opt/asterisk/scripts/astercc/astercc.conf </code> 再执行： <code> ln -s /opt/asterisk/scripts/astercc/astercc.conf /etc/astercc.conf </code> PHP1机器上： 13-7：将本机的agentsxindesk.ctp文件备份成agentsxindesk.ctp.bak 备份： <code> mv /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp.bak </code> 再执行： <code> ln -s /var/www/html/asterCC/statistics/agentsxindesk.ctp /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp </code> 13-8：备份： <code> mv /var/www/html/asterCC/app/config/database.php /var/www/html/asterCC/app/config/database.php.bak </code> 再执行： <code> ln -s /var/www/html/asterCC/statistics/database.php /var/www/html/asterCC/app/config/database.php </code> 13-9：将本机的hcdesk.conf文件备份成hcdesk.conf.bak 备份： <code> mv /usr/local/conf/hcdesk.conf /usr/local/conf/hcdesk.conf.bak </code> 再执行： <code> ln -s /opt/asterisk/scripts/astercc/hcdesk.conf /usr/local/conf/hcdesk.conf </code> 13-10：将本机的astercc.conf文件备份成astercc.conf.bak 备份： <code> mv /etc/astercc.conf /etc/astercc.conf.bak </code> 再执行： <code> ln -s /opt/asterisk/scripts/astercc/astercc.conf /etc/astercc.conf </code> PHP2机器上： 13-11：将本机的agentsxindesk.ctp文件备份成agentsxindesk.ctp.bak 备份： <code> mv /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp.bak </code> 再执行： <code> ln -s /var/www/html/asterCC/statistics/agentsxindesk.ctp /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp </code> 13-12：备份： <code> mv /var/www/html/asterCC/app/config/database.php /var/www/html/asterCC/app/config/database.php.bak </code> 再执行： <code> ln -s /var/www/html/asterCC/statistics/database.php /var/www/html/asterCC/app/config/database.php </code> 13-13：将本机的hcdesk.conf文件备份成hcdesk.conf.bak 备份： <code> mv /usr/local/conf/hcdesk.conf /usr/local/conf/hcdesk.conf.bak </code> 再执行： <code> ln -s /opt/asterisk/scripts/astercc/hcdesk.conf /usr/local/conf/hcdesk.conf </code> 13-14：将本机的astercc.conf文件备份成astercc.conf.bak 备份： <code> mv /etc/astercc.conf /etc/astercc.conf.bak </code> 再执行： <code> ln -s /opt/asterisk/scripts/astercc/astercc.conf /etc/astercc.conf </code> 14.修改一些文件的内容 CTI机器上： /etc/asterisk/manager.conf 文件中，在文件最后面，添加所在网段的信息如下，然后保存退出，执行命令： <code> asterisk -rx "manager reload" </code> <code> [astercc] secret = asterccsecret deny=0.0.0.0/0.0.0.0 permit=127.0.0.1/255.255.255.0 permit=192.168.1.0/255.255.255.0 read = system,call,agent write = system,call,agent,user,config,command,reporting,originate </code> /etc/astercc.conf 文件中，[asterisk]标签下，server填写CTI的IP <code> [asterisk] server = 192.168.1.62 port = 5038 username = astercc secret = asterccsecret </code> 15.注意/etc/asterisk 的权限，asterisk:asterisk 16.crontab文件内容，执行：crontab -e 进行对其内容的编辑。crontab 中监测启动的程序，互补即可，不要有重复运行的。 CTI： <code> 30 12 * * * /opt/asterisk/scripts/astercc/processmonitors -d 30 20 * * * /opt/asterisk/scripts/astercc/processmonitors -d 30 23 * * * /opt/asterisk/scripts/astercc/processmonitors -d * * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app asterccdelete >/dev/null 2>&1 10 2 * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app nighttask >/dev/null 2>&1 10 0 * * * /opt/asterisk/scripts/astercc/agent_report -d 20 0 * * * /opt/asterisk/scripts/astercc/agentgroup_report -d </code> MySQL： 全删除，不需要执行任何程序。 PHP1 和 PHP2，两台机器需要根据配置和负载来划分执行哪些脚本，两台机器不要都执行，做到互补以下脚本即可： <code> * * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app checkonline >/dev/null 2>&1 * 2 * * * /opt/asterisk/scripts/astercc/astcc_backup.sh >/dev/null 2>&1 * * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app monitortar >/dev/null 2>&1 * * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app backupmonitor >/dev/null 2>&1 * * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app export >/dev/null 2>&1 * * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app asterccimport >/dev/null 2>&1 */5 * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app calculate >/dev/null 2>&1 * * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app mailman >/dev/null 2>&1 * * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app campaignpackgetask >/dev/null 2>&1 * * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app blacklistfilter >/dev/null 2>&1 * * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app asterccfilter >/dev/null 2>&1 * * * * * /opt/asterisk/scripts/astercc/astcc_historydata -d </code> 17.mount 挂载的检测，需要添加到crontab中。 CTI： <code> */5 * * * * dfccdata=`df |grep ccdata`; [ "X${dfccdata}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccdata /var/www/html/asterCC/data`; */5 * * * * dfccstatistics=`df |grep ccstatistics`; [ "X${dfccstatistics}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccstatistics /var/www/html/asterCC/statistics`; </code> PHP1： <code> */5 * * * * dfccastspool=`df |grep ccastspool`; [ "X${dfccastspool}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastspool /var/spool/asterisk/`; */5 * * * * dfastetc=`df |grep etc/asterisk`; [ "X${dfastetc}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastetc /etc/asterisk/`; */5 * * * * dfccastlib=`df |grep ccastlib`; [ "X${dfccastlib}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastlib /var/lib/asterisk/`; */5 * * * * dfccscripts=`df |grep ccscripts`; [ "X${dfccscripts}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccscripts /opt/asterisk/scripts/astercc/`; </code> PHP2： <code> */5 * * * * dfccdata=`df |grep ccdata`; [ "X${dfccdata}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccdata /var/www/html/asterCC/data`; */5 * * * * dfccstatistics=`df |grep ccstatistics`; [ "X${dfccstatistics}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccstatistics /var/www/html/asterCC/statistics`; */5 * * * * dfccastspool=`df |grep ccastspool`; [ "X${dfccastspool}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastspool /var/spool/asterisk/`; */5 * * * * dfastetc=`df |grep etc/asterisk`; [ "X${dfastetc}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastetc /etc/asterisk/`; */5 * * * * dfccastlib=`df |grep ccastlib`; [ "X${dfccastlib}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastlib /var/lib/asterisk/`; */5 * * * * dfccscripts=`df |grep ccscripts`; [ "X${dfccscripts}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccscripts /opt/asterisk/scripts/astercc/`; </code> 18.最后， 在CTI机器上执行： <code> /opt/asterisk/scripts/astercc/asterccc --RNI </code> 在PHP1机器上执行： <code> /opt/asterisk/scripts/astercc/asterccc --ADI </code> 在PHP2机器上执行： <code> /opt/asterisk/scripts/astercc/asterccc --ADI </code> 正常在CTI上会提示：001，在PHP1上会提示002，在PHP2上会提示003，再重新做授权。在CTI上重启asterccd服务，看是否有报错。