✎ en:常见问题及解答:如何为astercc系统配置多台php服务器 [asterCC, hosted call center solution based asterisk]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== How to configure multiple PHP servers for the asterCC system ======

===== System Details =====

  * CTI(Asterisk)、Nginx：192.168.1.62  (Extranet IP：110.249.148.246)
  * MySQL：192.168.1.60
  * PHP1：192.168.1.61
  * PHP2：192.168.1.70

<note> Note: Before doing the distribution, make sure that the version of asterCC for all servers must be the same, followed by the same module. </note>

1.Before distributing the system, you need to back up the database on the CTI machine. 
<code> mysqldump -uroot -ppassword astercc10 > file.sql </code>

And then in the new mysql database server (192.168.1.60) on the backup data import.
<code> mysql -uroot -ppassword astercc10 < file.sql </code>


2.On the MySQL machine, the CTI, PHP1, PHP2 machine database authorization.
In the mysql> under the implementation of the following order:
<code> grant all privileges on astercc10.* to astercc@'192.168.1.%' identified by 'asterccpw'; </code>


3.In the CTI, PHP1, PHP2 three machines /etc/astercc.conf, revised: [database] and [statistics] tab under the database information:
<code>
[database] 
dbtype = mysql 
dbhost = 192.168.1.60 
dbname = astercc10 
dbport = 3306 
username = astercc 
password = asterccpw 
prefix= cc10_ 

[statistics] 
;on/off 
status = on 
dbtype = mysql 
dbhost = 192.168.1.60 
dbname = astercc10 
dbport = 3306 
dbuser = astercc 
dbpassword = asterccpw 
prefix= cc10_ 


[system] 
;if Cluster no,php,asterisk,all 
cluster = php 
</code>

<note> Note: The conf file in the system under the label, do what cluster, it will be modified into what. </note>


4.In /var/www/html/asterCC/app/config/database.php file var $default=array database at the end of the file information is modified as follows:

class DATABASE_CONFIG { 
        var $default = array( 
                'driver' => 'mysql', 
                'persistent' => false, 
                'host' => '192.168.1.60', 
                'login' => 'astercc', 
                'password' => 'asterccpw', 
                'database' => 'astercc10', 
                'prefix' => 'cc10_', 
                'encoding' => 'utf8', 
        ); 

<note> Note: The contents of $test need not be modified。 </note>


5.Configure the iptables service, the implementation of the machine configuration is complete：service iptables restart 

CTI (and Nginx) machines：
<code>
*filter 
:INPUT DROP [32888:6036616] 
:FORWARD DROP [0:0] 
:OUTPUT ACCEPT [38964:13133002] 
-A INPUT -p udp -m udp --dport 5060 -j ACCEPT 
-A INPUT -p udp -m udp --dport 4569 -j ACCEPT 
-A INPUT -p udp -m udp --dport 5036 -j ACCEPT 
-A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT 
-A INPUT -p udp -m udp --dport 2727 -j ACCEPT 
-A INPUT -p udp -m udp --dport 137:138 -j ACCEPT 
-A INPUT -p udp -m udp --dport 123 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 80 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 8081 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 443 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 21 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 22 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 139 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 389 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 445 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 5038 -j ACCEPT 
-A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT 
-A INPUT -s 127.0.0.1/32 -d 127.0.0.1/32 -j ACCEPT 
-A INPUT -m state --state ESTABLISHED -j ACCEPT 
COMMIT
</code>


On a MySQL machine:
<code>
*filter 
:INPUT DROP [32888:6036616] 
:FORWARD DROP [0:0] 
:OUTPUT ACCEPT [38964:13133002] 
-A INPUT -p udp -m udp --dport 5060 -j ACCEPT 
-A INPUT -p udp -m udp --dport 4569 -j ACCEPT 
-A INPUT -p udp -m udp --dport 5036 -j ACCEPT 
-A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT 
-A INPUT -p udp -m udp --dport 2727 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 3306 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 80 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 443 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 21 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 22 -j ACCEPT 
-A INPUT -p udp -m udp --dport 161 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 161 -j ACCEPT 
-A INPUT -p udp -m udp --dport 162 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 162 -j ACCEPT 
-A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT 
-A INPUT -s 127.0.0.1/32 -d 127.0.0.1/32 -j ACCEPT 
-A INPUT -m state --state ESTABLISHED -j ACCEPT 
COMMIT 
</code>


On PHP1 machines:
<code>
*filter 
:INPUT ACCEPT [32888:6036616] 
:FORWARD ACCEPT [0:0] 
:OUTPUT ACCEPT [38964:13133002] 
-A INPUT -p udp -m udp --dport 5060 -j ACCEPT 
-A INPUT -p udp -m udp --dport 4569 -j ACCEPT 
-A INPUT -p udp -m udp --dport 5036 -j ACCEPT 
-A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT 
-A INPUT -p udp -m udp --dport 2727 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 9000 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 80 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 443 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 21 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 22 -j ACCEPT 
-A INPUT -p tcp -m tcp --dport 5038 -j ACCEPT 
COMMIT 
</code>


On PHP2 machines:
like PHP1

<code>
Port: According to the actual situation, the /etc/sysconfig/iptables file to retain the port.
21: FTP default port
22: SSH default port
80: http acquiescence port, because I changed the machine 8081, the CTI iptables added 8081
123: NTP default port
137: udp samba port
138: udp samba port
139: tcp samba port
389: tcp samba port
445: tcp samba port
901: tcp samba port
161: Port of SNMP
162: Port of the SNMP trap
443: https default port
2727: MGCP default port
3306: mysql default port
4569: IAX2 default port
5036: IAX1 default port
5038: Asterisk default port
5060: sip The default port
9000: php default port
10000: 20000: Asterisk RTP to use the port
</code>


6.In CTI, PHP1 installed samba services, the Executive Order:
<code> yum install samba </code>


7.After installation is complete, create samba user and password, such as: sbu/123456,
run：
<code> useradd sbu </code>
And then, when prompted, enter 123456:
<code> smbpasswd -a sbu </code>

8.Modify the samba configuration file /etc/samba/smb.conf, smb.conf file at the end add the following:

On a CTI machine:
<code>
[ccastspool] 
        path = /var/spool/asterisk 
        comment = Home Directories 
        browseable = no 
        writable = yes 
;       valid users = %S 
;       valid users = MYDOMAIN\%S 
        create mask=777 
        directory mask = 777 
        force user = asterisk 

[ccastetc] 
        path = /etc/asterisk/ 
        comment = Home Directories 
        browseable = no 
        writable = yes 
;       valid users = %S 
;       valid users = MYDOMAIN\%S 
        create mask=777 
        directory mask = 777 
        force user = asterisk 

[ccastlib] 
        path = /var/lib/asterisk/ 
        comment = Home Directories 
        browseable = no 
        writable = yes 
;       valid users = %S 
;       valid users = MYDOMAIN\%S 
        create mask=777 
        directory mask = 777 
        force user = asterisk 

[ccscripts] 
        path = /opt/asterisk/scripts/astercc 
        comment = Home Directories 
        browseable = no 
        writable = yes 
;       valid users = %S 
;       valid users = MYDOMAIN\%S 
        create mask=777 
        directory mask = 777 
        force user = asterisk
</code>

On PHP1 machines:
<code>
[ccdata] 
        path = /var/www/html/asterCC/data 
        comment = Home Directories 
        browseable = no 
        writable = yes 
;       valid users = %S 
;       valid users = MYDOMAIN\%S 
        create mask=777 
        directory mask = 777 
        force user = asterisk 

[ccstatistics] 
        path = /var/www/html/asterCC/statistics 
        comment = Home Directories 
        browseable = no 
        writable = yes 
;       valid users = %S 
;       valid users = MYDOMAIN\%S 
        create mask=777 
        directory mask = 777 
        force user = asterisk 
</code>


9.After the configuration is complete, restart the Samba service configuration to take effect, execute the command:
<code> service smb restart </code>

10.The samba file, mounted on each other. (For example, on a CTI machine, mount the ccdata from the PHP1 machine to the /var/www/html/asterCC/data directory on the CTI machine, and then mount the cdt file on the CTI machine. Then need to CTI machines, /var/www/html/asterCC/data backup, the backup process is not described here in detail)


On the CTI machine, execute the following commands to mount:
<code>
mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccdata /var/www/html/asterCC/data
mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccstatistics /var/www/html/asterCC/statistics 
</code>

PHP1 machines, followed by the implementation of orders, carrying:
<code>
mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastspool /var/spool/asterisk 
mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccscripts /opt/asterisk/scripts/astercc 
mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastlib /var/lib/asterisk 
mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastetc /etc/asterisk
</code>

PHP2 machines, followed by orders for carrying:
<code>
mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccstatistics /var/www/html/asterCC/statistics
mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccdata /var/www/html/asterCC/data
mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastspool /var/spool/asterisk 
mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastlib /var/lib/asterisk 
mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastetc /etc/asterisk 
mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccscripts /opt/asterisk/scripts/astercc
</code>

Set the boot automatically mount, master and slave can be mounted on all the settings are similar to the following:
<code>vim /etc/fstab</code>
<code>文件末增加如下 ： //192.168.1.61/ccdata /var/www/html/asterCC/data cifs defaults,username=sbu,password=123456 0 0</code>

{{:zh:常见问题及解答:selection_004.png?750|}}

11.修改 /etc/php-fpm.d/www.conf 配置文件内容
CTI机器上：
<code>
[www]
listen=127.0.0.1
listen.allowed_clients=127.0.0.1
</code>

PHP1机器上：
<code>
[www]
listen=192.168.1.61:9000
listen.allowed_clients=127.0.0.1,192.168.1.61,192.168.1.62
</code>

PHP2机器上：
<code>
[www]
listen=192.168.1.70:9000
listen.allowed_clients=127.0.0.1,192.168.1.70,192.168.1.62
</code>


12.修改/usr/local/nginx/conf/nginx.conf 配置文件
CTI机器上：

12-1：在http中添加以下内容：
<code>
http{

upstream myphp { 
        #ip_hash; PHP负载均衡
        server 192.168.1.61:9000 weight=2; 
        server 192.168.1.70:9000 weight=2; 
    }
}
</code>

<note> 注：http中server内的listen xxxx default，是指的页面访问的端口号。 </note>

12-2：在location中前面位置添加以下内容，并将默认配置的fastcgi_pass  127.0.0.1:9000; 用#号注释掉：
<code>
location ~ .*\.(php|php5)?$ 
{ 
       #这个表示login和reload时，使用本机的PHP服务，因此CTI的php-fpm服务是开启的，而且开机自启动
        set $target myphp; 
        if ($request_uri ~* login) { 
            set $target 127.0.0.1:9000; 
        } 
        if ($request_uri ~* reloadConf) { 
            set $target 127.0.0.1:9000; 
        } 
        fastcgi_pass  $target; 
        #fastcgi_pass  127.0.0.1:9000; 
}
</code>

<note> 注：PHP1与PHP2机器上，这些配置都不用管，因为PHP1和PHP2上不使用nginx服务，默认fastcgi_pass  均为 127.0.0.1:9000; 

如果只使用1台服务器(如:PHP1)运行PHP服务，而不使用PHP负载均衡，那么，CTI中不需要添加任何的内容。并且，location中第一句set $target myphp; 内容也需要修改成PHP1的地址加端口，即：set $target 192.168.1.61:9000;
</note>


13.授权相关文件的共用

CTI机器上：

13-1：先拷贝到mount的目录：
<code> cp -Rp /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp /var/www/html/asterCC/statistics/agentsxindesk.ctp </code>
再执行：
<code> ln -s /var/www/html/asterCC/statistics/agentsxindesk.ctp /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp </code>

13-2：拷贝：
<code> cp -Rp /var/www/html/asterCC/app/config/database.php /var/www/html/asterCC/statistics/database.php </code>
再执行：
<code> ln -s /var/www/html/asterCC/statistics/database.php /var/www/html/asterCC/app/config/database.php </code>

13-3：/opt/asterisk/scripts/astercc/identity.astercc 文件，不用做任何操作，但要保证该文件，是最开始CTI机器上mount前备份过的文件。

13-4：/opt/asterisk/scripts/astercc/license.astercc文件， 不用做任何操作，但要保证该文件，是最开始CTI机器上mount前备份过的文件。

13-5：拷贝：
<code> cp -Rp /usr/local/conf/hcdesk.conf /opt/asterisk/scripts/astercc/hcdesk.conf </code>
再执行：
<code> ln -s /opt/asterisk/scripts/astercc/hcdesk.conf /usr/local/conf/hcdesk.conf </code>


13-6：拷贝：
<code> cp -Rp /etc/astercc.conf /opt/asterisk/scripts/astercc/astercc.conf </code>
再执行：
<code> ln -s /opt/asterisk/scripts/astercc/astercc.conf /etc/astercc.conf </code>


PHP1机器上：

13-7：将本机的agentsxindesk.ctp文件备份成agentsxindesk.ctp.bak
备份：
<code> mv /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp.bak </code>
再执行：
<code> ln -s /var/www/html/asterCC/statistics/agentsxindesk.ctp /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp </code>

13-8：备份：
<code> mv /var/www/html/asterCC/app/config/database.php /var/www/html/asterCC/app/config/database.php.bak </code>
再执行：
<code> ln -s /var/www/html/asterCC/statistics/database.php /var/www/html/asterCC/app/config/database.php </code>


13-9：将本机的hcdesk.conf文件备份成hcdesk.conf.bak
备份：
<code> mv /usr/local/conf/hcdesk.conf /usr/local/conf/hcdesk.conf.bak </code>
再执行：
<code> ln -s /opt/asterisk/scripts/astercc/hcdesk.conf /usr/local/conf/hcdesk.conf </code>

13-10：将本机的astercc.conf文件备份成astercc.conf.bak
备份：
<code> mv /etc/astercc.conf /etc/astercc.conf.bak </code>
再执行：
<code> ln -s /opt/asterisk/scripts/astercc/astercc.conf /etc/astercc.conf </code>


PHP2机器上：

13-11：将本机的agentsxindesk.ctp文件备份成agentsxindesk.ctp.bak
备份：
<code> mv /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp.bak </code>
再执行：
<code> ln -s /var/www/html/asterCC/statistics/agentsxindesk.ctp /var/www/html/asterCC/app/views/agents/agentsxindesk.ctp </code>

13-12：备份：
<code> mv /var/www/html/asterCC/app/config/database.php /var/www/html/asterCC/app/config/database.php.bak </code>
再执行：
<code> ln -s /var/www/html/asterCC/statistics/database.php /var/www/html/asterCC/app/config/database.php </code>

13-13：将本机的hcdesk.conf文件备份成hcdesk.conf.bak
备份：
<code> mv /usr/local/conf/hcdesk.conf /usr/local/conf/hcdesk.conf.bak </code>
再执行：
<code> ln -s /opt/asterisk/scripts/astercc/hcdesk.conf /usr/local/conf/hcdesk.conf </code>

13-14：将本机的astercc.conf文件备份成astercc.conf.bak
备份：
<code> mv /etc/astercc.conf /etc/astercc.conf.bak </code>
再执行：
<code> ln -s /opt/asterisk/scripts/astercc/astercc.conf /etc/astercc.conf </code>


14.修改一些文件的内容

CTI机器上：

/etc/asterisk/manager.conf 文件中，在文件最后面，添加所在网段的信息如下，然后保存退出，执行命令：
<code> asterisk -rx "manager reload" </code>

<code>
[astercc]
secret = asterccsecret 
deny=0.0.0.0/0.0.0.0 
permit=127.0.0.1/255.255.255.0 
permit=192.168.1.0/255.255.255.0 
read = system,call,agent 
write = system,call,agent,user,config,command,reporting,originate 
</code>

/etc/astercc.conf 文件中，[asterisk]标签下，server填写CTI的IP
<code>
[asterisk] 
server = 192.168.1.62 
port = 5038 
username = astercc 
secret = asterccsecret 
</code>


15.注意/etc/asterisk 的权限，asterisk:asterisk

16.crontab文件内容，执行：crontab -e 进行对其内容的编辑。crontab 中监测启动的程序，互补即可，不要有重复运行的。  

CTI：

<code>
30 12 * * * /opt/asterisk/scripts/astercc/processmonitors -d 
30 20 * * * /opt/asterisk/scripts/astercc/processmonitors -d 
30 23 * * * /opt/asterisk/scripts/astercc/processmonitors -d 
* * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app asterccdelete >/dev/null 2>&1 
10 2 * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app nighttask >/dev/null 2>&1 
10 0 * * * /opt/asterisk/scripts/astercc/agent_report -d 
20 0 * * * /opt/asterisk/scripts/astercc/agentgroup_report -d 
</code>

MySQL：
全删除，不需要执行任何程序。


PHP1 和 PHP2，两台机器需要根据配置和负载来划分执行哪些脚本，两台机器不要都执行，做到互补以下脚本即可：
<code>
* * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app checkonline >/dev/null 2>&1 
* 2 * * * /opt/asterisk/scripts/astercc/astcc_backup.sh >/dev/null 2>&1 
* * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app monitortar >/dev/null 2>&1 
* * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app backupmonitor >/dev/null 2>&1 
* * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app export >/dev/null 2>&1 
* * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app asterccimport >/dev/null 2>&1 
*/5 * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app calculate >/dev/null 2>&1 
* * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app mailman >/dev/null 2>&1 
* * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app campaignpackgetask >/dev/null 2>&1 
* * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app blacklistfilter >/dev/null 2>&1 
* * * * * /var/www/html/asterCC/cake/console/cake -app /var/www/html/asterCC/app asterccfilter >/dev/null 2>&1 
* * * * * /opt/asterisk/scripts/astercc/astcc_historydata -d 
</code>


17.mount 挂载的检测，需要添加到crontab中。
CTI：
<code>
*/5 * * * * dfccdata=`df |grep ccdata`; [ "X${dfccdata}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccdata /var/www/html/asterCC/data`; 
*/5 * * * * dfccstatistics=`df |grep ccstatistics`; [ "X${dfccstatistics}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccstatistics /var/www/html/asterCC/statistics`;
</code>


PHP1：
<code>
*/5 * * * * dfccastspool=`df |grep ccastspool`; [ "X${dfccastspool}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastspool /var/spool/asterisk/`; 
*/5 * * * * dfastetc=`df |grep etc/asterisk`; [ "X${dfastetc}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastetc /etc/asterisk/`; 
*/5 * * * * dfccastlib=`df |grep ccastlib`; [ "X${dfccastlib}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastlib /var/lib/asterisk/`; 
*/5 * * * * dfccscripts=`df |grep ccscripts`; [ "X${dfccscripts}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccscripts /opt/asterisk/scripts/astercc/`;
</code>


PHP2：
<code>
*/5 * * * * dfccdata=`df |grep ccdata`; [ "X${dfccdata}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccdata /var/www/html/asterCC/data`; 
*/5 * * * * dfccstatistics=`df |grep ccstatistics`; [ "X${dfccstatistics}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.61/ccstatistics /var/www/html/asterCC/statistics`; 

*/5 * * * * dfccastspool=`df |grep ccastspool`; [ "X${dfccastspool}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastspool /var/spool/asterisk/`; 
*/5 * * * * dfastetc=`df |grep etc/asterisk`; [ "X${dfastetc}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastetc /etc/asterisk/`; 
*/5 * * * * dfccastlib=`df |grep ccastlib`; [ "X${dfccastlib}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccastlib /var/lib/asterisk/`; 
*/5 * * * * dfccscripts=`df |grep ccscripts`; [ "X${dfccscripts}" = "X" ] && `mount -t cifs -o username=sbu,password=123456 //192.168.1.62/ccscripts /opt/asterisk/scripts/astercc/`;
</code>


18.最后，

在CTI机器上执行：
<code> /opt/asterisk/scripts/astercc/asterccc --RNI </code>
在PHP1机器上执行：
<code> /opt/asterisk/scripts/astercc/asterccc --ADI </code>
在PHP2机器上执行：
<code> /opt/asterisk/scripts/astercc/asterccc --ADI </code>

正常在CTI上会提示：001，在PHP1上会提示002，在PHP2上会提示003，再重新做授权。在CTI上重启asterccd服务，看是否有报错。