Differences

This shows you the differences between two versions of the page.

--- en:newbie:add_the_extension [2012/02/06 02:59] – created wangl
+++ en:newbie:add_the_extension [2012/02/13 04:17] (current) – shangy
@@ Line 1: / Line 1: @@
 <note tip>
-**Then one of how to create a team, add the account, we add extensions and internal calls.**
+**Here we are to learn how to add an device and realize inside calls**
 </note>
-==== Add ext. ====
+==== Add an device ====
-Set the extension parameter to ensure that the extension can be connected to the system. The extension device is used to register the soft phone answering and ordinary dial telephone.
+Set the parameter of the device to make sure the device can be connected to the system. The devices are used to register soft phones, answer phone calls and direct-dial ordinary phone calls.
-Can add accounts to save for some account to add the extension:
+When you finished adding accounts, you can directly add devices for the accounts:
-{{:zh:分机向导.png|}}
+{{:en:newbie:addaccount02.png?|}}
-Extension wizard, just click "Add extension" button to add more than one extension for the account.
+Click "Add Device" to add devices for the account.
-You can also enter the account and permission management system under the management of the list on the left side click -> Account Management, double-click to create a good account to open the editing interface:
+Also, you can enter the manage list on the left, click Account and permissions management -> Account management, double-click the account to open edit page:
+{{:en:newbie:addextension02.png?|}}
-{{:zh:编辑账号.png|}}
+Click "Add device", entering the PBX management -> Device management page, and get in the "Add Device" page to add devices.
-Click the "Add extension" button directly into the PBX Management -> Device Manager to add the extension interface, add the extension
+{{:en:newbie:addextension03.png?|}}
-{{:zh:分机设备.png|}}
+You can also click "Add" under the PBX management -> Device management to add devices:
-Also can go directly to the PBX management system left --> Device Manager directly add the extension:
+{{:en:newbie:addextension04.png?|}}
+Device name: pick a name for this device.
-{{:zh:设备管理11.png|}}
+Secret: Set a password for this device; ( When you configure the soft phone, write it in the "password")
-Device Name: name of the device, any fill;
+Team: Choose which team this device belongs to;
-Password: Set a device password; (in the configuration of the soft phone, fill in the password of a)
+User name: Choose which user this device belongs to;
-Team: which team equipment selection;
+Device extensions: set the extension number used in inside calls;
-Username: belongs to which user equipment selection;
+Caller ID: the calling number shown when calling (apply to IP phone)
-Extension number: to set up your extension number for internal calls;
+Caller name: the caller name shown when calling (apply to IP Phone)
-Caller ID: setting up a calling number display (ip phone);
+Identity: generated automatically, made of team + extension number.( when you configure the soft phone, write it in the "user name")
-Caller Name: caller to be displayed when the name (for ip phone);
+* items are obliged to fill, the rest can be filled out when you find it necessary. when you complete, click “Save” button.
-Identifier: automatically generated by the team + ext. (In the configuration of the soft phone, fill in the user name one);
-Device Type: system default SIP, the drop-down list under other types of alternative;
-Device Status: Set this device if you can use;
-Mode version: device parameter to use templates.
-"* "Items to be filled, the rest of the roots need to choose to fill out, completed, click "Save" button.
 <note warning>
-After the extension information is stored, the yellow tip strip appears, requirements overload, click the yellow tip strip, the system returns the information, suggesting overloaded successful, the yellow bar disappears.
+After you saved the device information, a yellow prompt will show up, which asks you to reload. Click it and get it reloaded, then the yellow prompt will disappear.
 </note>
-In accordance with these methods, you can choose to add an extension to save the information is complete, we can be left under the list of PBX Management -> Device Manager list to see the added extension
-{{:zh:列表.png|}}
-Either an extension of the data, double-click the extension list, you can open the editing interface, double-click the black font edit, gray font can not be modified after the mouse leaves the system prompts successfully updated information is automatically saved.
-{{:zh:编辑设备.png|}}
-Edit the blacklist: Click on the blacklist button, pop-up blacklist settings interface
+Through these methods, you can add devices. After saving the information, we will see the devices added under the PBX management-> Devices.
+{{:en:newbie:addextension05.png?|}}
-{{:zh:黑名单.png|}}
+Double-click whatever data in the device list to open the edit page. Black font means it is editable, and grey one isn't. When the mouse pointer left, the system will tell you that the information has been successfully saved.
-Completing the number, click on [Add to blacklist] button will appear in the table below, all is set to blacklist numbers, will not be transferred to your extension.
+{{:en:newbie:addextension06.png?|}}
-Edit the white list: Click this button to pop up white list settings interface
+Add blacklist: Click the button and enter the page of editing blacklist.
+{{:en:newbie:addextension07.png?|}}
-{{:zh:白名单.png|}}
+Enter the number, and click "Add blacklist" button, then the number will be in the following table. All the number in the blacklist cannot be out through to the device.
-Fill in the number, click the [Add to White List] button, it will appear in the table below, once you set white list, and then only within the white list number to dial in to your extension.
+Add whitelist: Click this button and enter the page of editing white list.
+{{:en:newbie:addextension08.png?|}}
-Internal calls can be realized, ext created to be soft phone configuration is successful.
+Enter the number, click"Add whitelist" button, then the number will be in the following table. Once you set a white list, only the number in this list can be put through to the device.
-**To enter [[configure a soft phone]] **
+Thus, devices have already set up. And when the soft phone are configured, the inside calls can be realized.
+**To enter [[Configure eyebeam soft phone]] **

en/newbie/add_the_extension.1328497189.txt.gz · Last modified: 2017/12/12 03:11 (external edit)

Show page Old revisions

Backlinks Back to top