Differences

This shows you the differences between two versions of the page.

--- en:module_manual:rate:customerrates [2013/06/26 08:46]
shixb created
+++ en:module_manual:rate:customerrates [2017/12/12 03:05] (current)
@@ Line 1: / Line 1: @@
-=====分机费率=====
+=====Device Rate=====
-=====分机费率的作用=====
+=====The Fucntion of Device Rate=====
-除了用于对分机的外呼进行计费以外,还起到中继选择的作用,匹配费率规则的呼叫将会送到相应的中继呼出
+Except for billing the device's outbounding calls, it also selects trunk. The rate matching rule divides calls into corresponding trunks.
-中继选择的顺序为:
+The order of trunk select:
-  - 账户组级费率匹配
+  - account-level rate match
-  - 团队级分机费率匹配
+  - team-level rate match
-  - 系统级分机费率匹配
+  - system-level rate match
-在同一级别的费率之下,匹配顺序为:
+The order of rate match under the same rate level:
-  - 前缀和长度同时匹配
+  - Prefix and length at the same time
-  - 长度匹配
+  - Length match
-  - 前缀匹配
+  - Prefix match
-  - 默认(default)费率匹配
+  - Default rate match
-点击 费率管理->分机费率,将会列出所有的分机费率
+Click **Rate--> Device rate**, and it shows all device rate.
 <note tip>
-  * 使用团队管理员登入,将列出该团队下的分机费率以及系统默认分机费率
+  * Login as the administrator, you will see all device rates under the team and the default device rate.
-  * 由系统设定的默认费率对于该团队是只读的
+  * The default rate is read only to the team.
 </note>
-=====添加分机费率=====
+=====Add device rate=====
-点击"添加"按钮,可以添加费率
+Click **[Add]** to enter the add rate page.
 {{:en:module_manual:rate:devicerate_add.jpg?|Add Device Rate}}
-====必填项目====
+====Required fields====
-  * 号码前缀： 该费率所匹配的被叫号码前缀,例如用”0”表示国内长途,”00”表示国际号码,”001”表示美国,使用”default”表示可以匹配任意号码,
+  * **Prefix**：the prefix of the called number which matches this rate. E.g., “0” for domestic long-distant dials, “00” for international numbers, “001” for Amrican numbers, “default” for any number.
-  * 计费周期：多久计费一次
+  * **Rate**: rate per minute
-  * 状态：分机费率是否启用
+  * **Billing block**： how often it bills, say the billing block is 60, means system will bill as 60 seconds even the call last 1 second.
-  * 号码长度：我们也可以通过限定号码长度来设定规则,0表示无限制
+  * **Status**: if the rate is in use
+  * **Length**：We can rule by setting the length of the number, and “0” for no restriction.
-====可选项目====
-  * 目标：为这条费率的应用目标起一个名字,例如”市话”,”长途”或”美国”
-  * 连接费率：电话接通时的费率
-  * 初始时长：接通费率所影响的时长
-  * 费率： 每分钟的费率
-  * 团队：选择该费率所应用的团队(team),如果未选择,表示该费率可以应用于所有的团队,使用过程中系统将优先匹配团队内的费率,如果没有找到任何匹配,则会查找没有指定团队的费率.
-  * 账号组：改费率所用用的账号组，如果未选择,表示该费率可以应用于所有的账号组
-  * 中继名称：需要被计费的中继名称
+====Optional fields====
+  * **Destination**: name this rate, for example “local calls”, “long distant calls” or “American”
+  * **Connect charge**: the rate once the call is connected
+  * **Init block**: the duration for the connect charge
+  * **Team**: the team this rate applies to. If leave it blank, this rate would apply to all teams. And during use, the system would priorly find the assigned rate of the team, and if nothing is found, then it will search for the unassigned rate.
+  * **Group**: which group the changed rate applied to, if leave it unchosen, it means this rate will be applied to all groups.
+  * **Trunk**: the name of the trunk this rate applies to
 <note tip>
-  * 添加分机费率时,如果不选择账号组则表示该费率应用到整个团队
+  * When add device rate, if do not choose a group, this rate will be applied to all groups.
-  * 号码长度写0,表示匹配所有长度
+  * If the length is 0, it means it matches all lengths.
-  * 号码前缀写default,表示匹配所有前缀
+  * Entering //default// in the prefix means it matches all prefix.
 </note>
-=====编辑分机费率=====
+=====Edit device rate=====
-双击费率,打开编辑页面
+Double click the rate to open the edit page.
 {{:en:module_manual:rate:devicerate_edit.jpg?|Edit Device Rate}}
-{{tag>:zh:rate}}
+{{tag>:en:rate}}
-{{topic>:zh:rate}}
+{{topic>:en:rate}}

en/module_manual/rate/customerrates.1372236366.txt.gz · Last modified: 2017/12/12 03:11 (external edit)

Show page Old revisions

Backlinks Back to top