Differences

This shows you the differences between two versions of the page.

--- en:module_manual:pbx:trunk [2013/08/03 01:50] – shangy
+++ en:module_manual:pbx:trunk [2014/03/14 01:02] (current) – [Optional fields] solo
@@ Line 29: / Line 29: @@
   * **CID name：** CID name displays (now only supports some trunks).
   * **Details：**enter the configuration parameter of the trunk
+  * **Max Unavailable:** When the call failed constantly via the trunk, it will be disabled, it often applies to predictive dialer, using a trunk group, this could avoid whole campaign fail due to one trunk problem. 0 means this feature is disabled.
   * **Max calls** the max. concurrent calls allowed in the trunk
 ==== Advanced ====
 {{:en:module_manual:pbx:trunk_add_advanced.jpg?768|Trunk Add For Advanced}}
-  * **Enforce use rate：**团队外呼时，根据中继去匹配分机费率，如果强制计费，必须匹配到分机费率才能外呼，否则不会外呼。如果不强制，那么就不需要匹配分机费率。
+  * **Enforce use rate：** When system try make a call via this trunk, it would try match a device rate of the trunk. If you use the enforce rate, you can't dial out if it failed to match a rate, if this option is not set to yes, system can dial out event no device rate match.
-  * **强制使用外呼主叫设置：**如果强制，那么不管其它地方设置的外呼主叫号码是多少，都会使用本中继设置的外呼主叫号码。
+  * **Always use trunk CID：**If you choose "yes" here, then no matter what number has been set outside this page, the number set in this trunk will be used.
-  * **级联中继** 当该系统要和其他系统同时使用时，请选择此选项。
+  * **Cluster trunk** If you use this system and other systems together, choose **"yes"**
-  * **级联主机地址** 输入级联主机的地址
+  * **Cluster trunk host**  enter the cluster trunk host address.
-  * **黑名单限制：**填写在黑名单内的号码将不能拨出拨入。
+  * **Black list：** number in this list cannot be placed or received.
-  * **白名单限制：**填写了白名单，那么只有白名单的号码可以通过此中继拨入拨出。
+  * **Black list：** If you enter numbers in this list, then only the number in this list can be placed or received.
-  * **备  注：**描述中继的一些信息，例如它的用途等。
+  * **Detail：** for discriptive information, like its purpose etc.
-===== 编辑中继 =====
+===== Edit trunk =====
-双击条目，打开中继的编辑窗口
+Double click the item to open the edit page.
 {{:en:module_manual:pbx:trunk_edit.jpg?768|Trunk Edit}}
@@ Line 51: / Line 51: @@
-点击 [编辑中继规则]，打开中继规则设置界面。
+Click [Edit rule] to open the trunk rule editer
 {{:en:module_manual:pbx:trunk_add_rule.jpg?768|Add Trunk Rule}}
-号码进入中继后，将按你设置的规则进行匹配，如果匹配到，就按你规定的规则去移除前缀，增加前缀。
+When a number enters the trunk, and it will match by the rule you set, and if it matches, the prefix will be deleted or added by you rules.
+**Rule Status: ** Including Enable, Disable, Refuse
-**属  性：** 包括 允许呼叫、禁用本规则、禁止呼叫。
+**Object：** Including Dst Number, Callerid Number, Calleriid Name
-**号码前缀：**匹配什么样的号码前缀。你写了0411   那么号码开头是0411的号码就会找到这条规则，并按规则去执行操作。
+**Ori prefix：** What kind of number with this prefix will match. IF you enter 0411, then the number start with 0411 will be matching this rule and execute by the rules.
-**号码长度：**要匹配的号码长度是多少。
+**Ori length：** the length of the number that matches.
-**移除前缀：**匹配到号码后，要将你填写的前缀删除。
+**Remove prefix：**When the number matches, the prefix you entered will be removed.
-**增加前缀：**匹配到号码后，要将你填写的内容放到号码前边。
+**Add prefix：**When the number matches, the prefix you entered will be added.
-规则设置完成后，点击【确定】按钮进行保存。保持后的数据将显示在下方的表格中。
+Click [save] after finishing the rule set, and the new information will be displayed on the table on the bottom.
 {{tag>:zh:模块使用说明:PBX管理 :zh:模块使用说明:PBX管理:中继 :zh:模块使用说明:PBX管理:中继:中继规则}}
 {{topic>:zh:中继}}

en/module_manual/pbx/trunk.1375494649.txt.gz · Last modified: 2017/12/12 03:11 (external edit)

Show page Old revisions

Backlinks Back to top