Differences

This shows you the differences between two versions of the page.

--- en:module_manual:pbx:trunk [2013/05/20 05:11] – created shixb
+++ en:module_manual:pbx:trunk [2014/03/14 01:02] (current) – [Optional fields] solo
@@ Line 1: / Line 1: @@
 ====== Trunk ======
+A trunk is a route connecting the local telephone network and other telephone network ( mainly the traditionl PSTN network or other IP PBX system).
+Trunks can be cataloged by the transmission media
+  * Internet trunk (SIP，IAX)
+  * Analog trunk (FXO口)
+  * Digital trunk (E1 PRI)
+===== Add a trunk =====
+On the left menu, click  [[:en:module_manual:pbx|PBX]] -> Trunk, and **[Add]** to open the trunk add page.
+{{:en:module_manual:pbx:trunk_add_general.jpg?768|Trunk Add For General}}
+==== Requird fields ====
+  * **Trunk** Set the name for the trunk for identification.
+  * **Team** Selece a team to which this trunk belongs. And after setting, this trunk can only be used in this team. If you do not assign this trunk a team, then all teams can use this trunk.
+  * **Protocol**  Choose a protocol for this trunk.
+  * **Registry string** When you choose SIP or IAX, and in order to receive the calls from this trunk, you need to enter a registry string of the trunk sometime. Standard format:** username:password@voip.sonicwell.com:5060**
+  * **Identity** The only identity. The system would automatically generate a string of number as the identity. And for some internet trunks, the identity needs to be the same as the trunk name, thus, manual adaption is needed here.
+  * **Time out** When the call attempt exceeds this tim and still not gets conneted, it is considered a failure.
+  * **Status** Whether to enable this trunk.
+==== Optional fields ====
+  * **Templates：** Select a trunk for this trunk. The use of templates makes it easy to manage the internet trunks of the same type.
+  * **CID Num：** The CID number displays
+  * **CID name：** CID name displays (now only supports some trunks).
+  * **Details：**enter the configuration parameter of the trunk
+  * **Max Unavailable:** When the call failed constantly via the trunk, it will be disabled, it often applies to predictive dialer, using a trunk group, this could avoid whole campaign fail due to one trunk problem. 0 means this feature is disabled.
+  * **Max calls** the max. concurrent calls allowed in the trunk
+==== Advanced ====
+{{:en:module_manual:pbx:trunk_add_advanced.jpg?768|Trunk Add For Advanced}}
+  * **Enforce use rate：** When system try make a call via this trunk, it would try match a device rate of the trunk. If you use the enforce rate, you can't dial out if it failed to match a rate, if this option is not set to yes, system can dial out event no device rate match.
+  * **Always use trunk CID：**If you choose "yes" here, then no matter what number has been set outside this page, the number set in this trunk will be used.
+  * **Cluster trunk** If you use this system and other systems together, choose **"yes"**
+  * **Cluster trunk host**  enter the cluster trunk host address.
+  * **Black list：** number in this list cannot be placed or received.
+  * **Black list：** If you enter numbers in this list, then only the number in this list can be placed or received.
+  * **Detail：** for discriptive information, like its purpose etc.
+===== Edit trunk =====
+Double click the item to open the edit page.
+{{:en:module_manual:pbx:trunk_edit.jpg?768|Trunk Edit}}
+Click [Edit rule] to open the trunk rule editer
+{{:en:module_manual:pbx:trunk_add_rule.jpg?768|Add Trunk Rule}}
+When a number enters the trunk, and it will match by the rule you set, and if it matches, the prefix will be deleted or added by you rules.
+**Rule Status: ** Including Enable, Disable, Refuse
+**Object：** Including Dst Number, Callerid Number, Calleriid Name
+**Ori prefix：** What kind of number with this prefix will match. IF you enter 0411, then the number start with 0411 will be matching this rule and execute by the rules.
+**Ori length：** the length of the number that matches.
+**Remove prefix：**When the number matches, the prefix you entered will be removed.
+**Add prefix：**When the number matches, the prefix you entered will be added.
+Click [save] after finishing the rule set, and the new information will be displayed on the table on the bottom.
+{{tag>:zh:模块使用说明:PBX管理 :zh:模块使用说明:PBX管理:中继 :zh:模块使用说明:PBX管理:中继:中继规则}}
+{{topic>:zh:中继}}

en/module_manual/pbx/trunk.1369026718.txt.gz · Last modified: 2017/12/12 03:11 (external edit)

Show page Old revisions

Backlinks Back to top