Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:newbie:configuration_eyebeam_softphone [2017/12/12 11:05] (current)
Line 1: Line 1:
 +<note tip>
 +**After the devices have been set up, we need to configure the soft phone. When soft phone are registered successfully,​ inside calls can be realized.**
 +</​note>​
 + 
  
 +===SIP Account settings===
 +
 +To set SIP account, right-click eyebeam interface, choose the SIP Account Settings, click the Add button to add an SIP account.
 +
 +{{:​zh:​新手上路:​sip设置.png?​|}}
 +
 +SIP account is an SIP-type device added in the corresponding system. Enter the system, open the device management page, and double-click a device record to open the interface shown as below:
 +
 +{{:​en:​newbie:​eyebeam02.png?​|}}
 +
 +The red font identifies the correspondence between the corresponding item in the device information and the SIP account settings in eyebeam,
 +
 +<note tip>
 +Displayname:​ enter the caller ID
 +
 +User name:enter an identification for an device
 +
 +Password:a device'​s password
 +
 +Domain: enter the Intranet IP address of the system.
 +</​note>​
 +
 +{{:​zh:​新手上路:​astercc-1008.png?​|}}
 +
 +Click "​确定"​ to submit the configuration.
 +
 +<note important>​
 +**the advantage of eyebeam over Xlite is that eyebeam supports multiple accounts, but Xlite only supports one account to manage the telephone service.
 +
 +**</​note>​
 +
 +{{:​zh:​新手上路:​accout.png?​|}}
 +
 +Tick the account needed, and click "​Add"​ at anytime to add new accounts.
 +
 +<note tip>
 +**Eyebeam also supports the g729 coding**  ​
 +</​note>​
 +
 +The "​Ready"​ information will show up if the configuration have been submitted and registration completed successfully.
 +
 +{{:​1008.png?​|}}
 +
 +* Function keys:
 +
 +{{:​en:​newbie:​eyebeam06.png?​|}}
 +
 +Now, the soft phone has been successfully configured. You can use it to realize callings, incoming calls and inside calls.
 +
 +You can dial extension numbers directly. When calls come in, their information will show up in the screen.
 +{{:​91008.png?​|}}
 +
 +**Continue to understand [[Configure the ring group]]
 +**
en/newbie/configuration_eyebeam_softphone.txt · Last modified: 2017/12/12 11:05 (external edit)
Recent changes RSS feed Debian Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki